BE YOU
PROFESSIONAL STARTER KIT
Professional Starter Kit is an essential kit for performing a semi-permanent manicure on your own.
Contains all the necessary products to independently and safely perform a manicure with a professional result directly at home! Ideal for those who decide to approach the world of semipermanent lacquering for the first time and need all the essential products for a complete application. All products contained in the Starter Kit are completely Hema Free, minimizing the risk of allergic reactions.
01 - NAIL PREPARATION
Give the nail the shape you like best with the help of the Cuticle Pusher File with the medium grain 180 side. Use the rounded side of the same Cuticle Pusher File, exerting light abrasive movements near the cuticles to carefully peel them off the nail.
Mattify the nail with the half-moon Buffer at low grit 220.
Clean the nail and remove impurities with the Cleanser, then remove oily traces from the nail with Nail Prep - nail dehydrator. Air dry for about 30 seconds.
02 - BASE
Spread a light layer of Ultra Bond - nail primer, being careful not to touch the cuticles, to allow the next products to adhere perfectly to the keratid layer of the nail.
Apply Base Coat, again avoiding touching the cuticles, and cure in the LED/UV lamp for 60 seconds.
Then, with a cotton pad soaked in Cleanser, remove the dispersion layer to facilitate subsequent color application.
03 - COLOR
Choose your favorite color from the wide range of Gel Polish and apply a thin, even layer after shaking the package well, being careful not to touch the cuticles. Cure for 120 seconds in UV lamp or 90 seconds in LED lamp.
Spread a second layer of color so that it seals the nail, especially at the tip. Polymerize again for 120 seconds in UV lamp or 90 seconds in LED lamp.
04 - TOP COAT
Spread the Top Coat over the color, curing for 60 seconds. Let it cool in the air for at least a minute, to prevent any matting, before removing the last layer of dispersion with a cotton pad soaked in Cleanser.
Tips: Base Coat, Gel Polish and Top Coat should be applied and cured on the thumb nails first. Otherwise-given their lateral position-the UV rays will not be able to reach them properly.
Remember not to apply the products over the cuticles to prevent air bubbles from forming under the polish.
05 - HOW TO REMOVE SEMI-PERMANENT NAIL POLISH
For optimal removal, first remove the topmost layer of semi-permanent nail polish with the 100/180 medium-high grit Nail Pusher File to allow the solvent to penetrate and help lift the nail polish. Wet a cotton ball with Remover and wrap it on the nail with aluminum foil so it adheres well. Leave it on for at least 15 minutes. Finish removing the semi-permanent nail polish with the 100/180 medium-high grit Buffer File and remove any residue with the 180/220 medium-low grit Buffer File.
REMOVER
Acetone.
PaO: 24 M (125 ml)
Warnings: Inflammable product. Keep away from heat sources. Keep out of reach of children. External use.
How to use: For optimal removal, it is recommended to first remove the top layer of nail polish with a medium-high grit file in order to allow the solvent to penetrate and help the nail polish to lift. Wet a cotton ball with Remover and wrap it tightly around the nail with aluminium foil. Leave on for at least 15 minutes. Finish removing the semi-permanent nail polish with a cuticle pusher or a medium-high grit file and remove any residue with a medium-low grit buffer file.
The list of ingredients may change; the consumer should refer to the product packaging for the most updated list.
CLEANSER
Isopropyl alcohol, Ethyl acetate.
PaO: 24 M (125 ml)
Warnings: Inflammable product. Keep away from heat sources. Keep out of reach of children. External use.
How to use: Before applying the Base coat, apply the product on a cotton pad and gently rub it on the nail to remove powder residues and the lipid layer. Repeat the operation after polymerisation of the Base coat to remove the dispersion layer. As a final step, degrease the nail after polymerisation of the Top Coat for an excellent shine.
The list of ingredients may change; the consumer should refer to the product packaging for the most updated list.
TOP COAT
Bis-HEA Poly(1,4-butanediol)-22/IPDI Copolymer, Benzyl Methacrylate, Trimethylolpropane trimethacrylate, Ethyl trimethylbenzoyl phenylphosphinate, Hydroxycyclohexyl phenyl ketone, PEG/PPG-27/27 dimethicone.
PaO: 12 M (5 ml)
Warnings: Keep out of reach of children. Avoid contact with skin and eyes. May cause allergic skin reaction. Causes skin irritation. In case of adverse reaction discontinue use of the product. In case of contact with eyes, rinse immediately with water and seek medical advice. Do not swallow. If swallowed, do not induce vomiting but seek medical advice and show the product. Keep container well closed after use, in a suitable cool and dry place, away from sources of artificial or direct sunlight and away from heat sources.
How to use: Apply the product over the colour, taking care not to touch skin and cuticles, then polymerise for 120 seconds in an LED/UV lamp.
The list of ingredients may change; the consumer should refer to the product packaging for the most updated list.
BASE COAT
Polyurethane-57, Benzyl Methacrylate, Isobornyl methacrylate, Ethyl trimethylbenzoyl phenylphosphinate, Bis(methacryloyloxyethyl) phosphate.
PaO: 12 M (5 ml)
Warnings: Keep out of reach of children. Avoid contact with skin and eyes. May cause allergic skin reaction. Causes skin irritation. In case of adverse reaction discontinue use of the product. In case of contact with eyes, rinse immediately with water and seek medical advice. Do not swallow. If swallowed, do not induce vomiting but seek medical advice and show the product. Keep container well closed after use, in a suitable cool and dry place, away from sources of artificial or direct sunlight and away from heat sources.
How to use: Apply the product, always avoiding touching the skin and cuticles, then polymerise in the LED/UV lamp for 60 seconds.
The list of ingredients may change; the consumer should refer to the product packaging for the most updated list.
ULTRA BOND
Methacrylic Acid, Aqua.
PaO: 12 M (6 ml)
Warnings: Only for professional use. Keep out of reach of children. Avoid contact with skin and eyes. May cause allergic skin reaction. May cause severe skin irritation. In case of adverse reaction discontinue use of the product. In case of contact with eyes, rinse immediately with water and seek medical advice. Do not swallow. If swallowed, do not induce vomiting but seek medical advice and show the product. Keep container well closed after use, in a suitable cool and dry place, away from sources of artificial or direct sunlight and away from heat sources.
How to use: Apply a light layer of product to the surface of the nail before applying the base coat, taking care not to touch the skin and cuticles. Allow to air dry for 30 seconds. Does not require a UV lamp.
The list of ingredients may change; the consumer should refer to the product packaging for the most updated list.
NAIL PROP
Isopropyl Alcohol, Ethyl Acetate, Isobutyl Acetate.
PaO: 12 M (6 ml)
Warnings: Tenere fuori dalla portata dei bambini. Evitare il contatto con la pelle ed occhi. Può provocare una reazione allergica cutanea. Provoca irritazione cutanea. In caso di reazione avversa sospendere l’uso del prodotto. In caso di contatto con gli occhi, sciacquare immediatamente con acqua e consultare un medico. Non ingerire. In caso di ingestione non provocare il vomito ma consultare un medico e mostrare il prodotto. Tenere il contenitore ben chiuso dopo l’uso, in ambiente adeguato, fresco e asciutto, lontano da fonti di luce artificiale o diretta del sole e da fonti di calore.
How to use: Apply the product to the nail surface, taking care not to touch skin and cuticles, then leave to air dry for 30 seconds. Nail Prep does not require a UV lamp.
The list of ingredients may change; the consumer should refer to the product packaging for the most updated list.
GEL POLISH
N.7: Polyurethane-57, Benzyl Methacrylate, Isobornyl Methacrylate, Trimethylolpropane Trimethacrylate, Peg-9 Dimethacrylate, Silica, Ethyl Trimethylbenzoyl Phenylphosphinate, CI 77891 (Titanium Dioxide), CI 77491 (Iron Oxides).
N.24: Polyurethane-57, Benzyl Methacrylate, Isobornyl methacrylate, Trimethylolpropane trimethacrylate, Peg-9 dimethacrylate, Silica, Ethyl trimethylbenzoyl phenylphosphinate, Bht, CI 15850 (Red 6), CI 15850 (Red 7).
PaO: 36 M (5 ml)
Warnings: Keep out of reach of children. Avoid contact with skin and eyes. May cause allergic skin reaction. Causes skin irritation. In case of adverse reaction discontinue use of the product. In case of contact with eyes, rinse immediately with water and seek medical advice. Do not swallow. If swallowed, do not induce vomiting but seek medical advice and show the product. Keep container well closed after use, in a suitable cool and dry place, away from sources of artificial or direct sunlight and away from heat sources.
How to use: Apply a thin, even layer on the surface of the nail after shaking the pack well, taking care not to touch the skin and cuticles. Polymerise for 120 seconds under UV lamp or 90 seconds under LED lamp. If necessary repeat the operation.
The list of ingredients may change; the consumer should refer to the product packaging for the most updated list.
Do you want to know how to correctly dispose of our packaging? (FR: Indications pour la collecte sélective) Show more >
MANICURE AND SEMIPERMANENT KIT
